Paracord Lanyard Knot How To By JK

User Rating:

/ 0

Details: Category: Articles; Published on Friday, 06 January 2012 14:31; Written by Administrator; Hits: 553

View Comments

1.The easiest way to make a Paracord Lanyard Knot is to take a loop and place it around your finger keeping both lengths the same size with the ends together.

2.Then you want to take one of the strains and loop it over like in the photo so that you have the other strain going down the middle in the back and follow the photos closely they will show you and i have highlighter the cord to show you where it's going I hope this helps!

3.Next you want to take the opposite line and bring it around the under the one with the loop.

4.And take it threw the loop and under its self than back up out of the loop like in the photo.

Now you are left with a cool design but you’re not done.

5.You need to take one of the strains, bring it under the other and around the top where it comes through your finger than around the point where it comes through your finger and under design and up through the center.

6.Then just pull it all the way till there is no play in the strain

7.Now you repeat for the other side bringing it under and around the bottom part where it comes through your hand and up from the back into the center and pull it tight.